Cookie preferences
- On sale!
- -15%
Cart
0
URGO Rechargeable Electrotherapy Patch-muscle or joint pain-neuralgic or traumatic-Immediate relief-Portable
Because it is a non-medicinal solution to take everywhere, without cables and with a rechargeable battery. Easy to use, reusable and rechargeable with up to 6 hours of autonomy. It is pre-programmed with 5 different programs, each with 15 adjustable intensity levels, depending on the diagnosis and need of each user to provide greater relief. Includes 2 reusable gels with approximately 30 uses per gel and a box to carry it with you. Gel refills are available in pharmacies, they will allow you to continue using the patch once the included gels are finished.
The Urgo Rechargeable Electrotherapy Patch has a soft support whose flexibility makes it easy to apply to painful areas.
Subject to medical advice. Before using electrotherapy, it is necessary that a health professional has made a diagnosis of the origin and cause of your pain. Your pharmacist or doctor can give you instructions on how to treat yourself with electrotherapy.
Immediate relief-Multi location-Portable
This patch is intended for all people:
From 16 years of age, who suffer from muscle, joint, neuralgic pain (after medical consultation) or traumatic (after medical consultation). For more information, see the prospectus.
That they seek a non-medicinal solution.
Looking for a multi-pain solution that is portable and durable.
Box contents:
1 rechargeable electrostimulator
1 USB charging cable
1 user guide
1 transport box
2 sachets of adhesive gel
2 year warranty.
How to use:
Full charge of the patch before use is recommended.
1. RECHARGE PREPARATION
Open the plastic envelope and take a refill of adhesive gel.
Gently remove the blue protective film making sure that the two parts of the adhesive gel remain in place on the transparent film.
Keep the blue protective film to put it back on the patch after each use.
2. PATCH PREPARATION
Using the transparent protective film, correctly position the two parts of the gel on the patch, making sure that they are perfectly superimposed on the two electrical circuit parts of the patch.
Remove the clear protective film, making sure the gels remain on the patch (hold the gel in place with your finger if necessary).
1 adhesive gel = 30 uses approx.
(Note: you can discard the transparent protective film)
3. APPLICATION AND INITIATION OF THE PATCH
For first use, we recommend applying the patch to a non-painful area in your field of vision (your arm, for example), to test it and understand how it works. Then you can put it on the painful area
Apply the patch on the painful area and briefly press the power button: a beep will sound and a green light will illuminate. “Program 1 is selected”
If you don't see a green light or hear a beep, this means the pad is out of charge. Recharge the patch using the supplied cable.
4. PROGRAM SELECTION
There are 5 programs available. Each program lasts 30 minutes. To learn more, see the full manual.
When you turn on the patch, program 1 will be selected by default: This is the recommended program for first use.
To change program, keep the (+) button pressed (approx. 3 sec. until you hear a series of beeps): 2 beeps indicate that program 2 has been activated. Release the button. Make a long press to go to program 3: 3 beeps. You can repeat the procedure until program 5: 5 beeps.
To start stimulation, go to the next stage.
5. START OF STIMULATION AND ADJUSTMENT OF INTENSITY
Once the program has been selected, briefly press the (+) button once to start stimulation.
You can adjust the intensity by briefly pressing the (+) and (-) buttons.
There are 15 intensity levels available
6. PATCH SHUTDOWN
After 30 minutes, the device automatically turns off.
If you want to turn off the device before the end of the session, briefly press the power off button (The pad will turn off with 3 beeps and 3 lights).
7. PATCH STORAGE
Before removing the patch, make sure it is turned off. Gently remove the patch, making sure the gels are still in contact with the electrical circuit (hold the gel with your finger if necessary).
Leave the gels on the patch and cover them with the blue protective film that you previously reserved.
Store the patch in the shipping box.
For the following uses, remove the blue protective film and go directly to step 3.
URGO Rechargeable Electrotherapy Patch-muscle or joint pain-neuralgic or traumatic-Immediate relief-Portable
URGO Rechargeable Electrotherapy Patch-muscle or joint pain-neuralgic or traumatic-Immediate relief-Portable
Because it is a non-medicinal solution to take everywhere, without cables and with a rechargeable battery. Easy to use, reusable and rechargeable with up to 6 hours of autonomy. It is pre-programmed with 5 different programs, each with 15 adjustable intensity levels, depending on the diagnosis and need of each user to provide greater relief. Includes 2 reusable gels with approximately 30 uses per gel and a box to carry it with you. Gel refills are available in pharmacies, they will allow you to continue using the patch once the included gels are finished.
The Urgo Rechargeable Electrotherapy Patch has a soft support whose flexibility makes it easy to apply to painful areas.
Subject to medical advice. Before using electrotherapy, it is necessary that a health professional has made a diagnosis of the origin and cause of your pain. Your pharmacist or doctor can give you instructions on how to treat yourself with electrotherapy.
Immediate relief-Multi location-Portable
This patch is intended for all people:
From 16 years of age, who suffer from muscle, joint, neuralgic pain (after medical consultation) or traumatic (after medical consultation). For more information, see the prospectus.
That they seek a non-medicinal solution.
Looking for a multi-pain solution that is portable and durable.
Box contents:
1 rechargeable electrostimulator
1 USB charging cable
1 user guide
1 transport box
2 sachets of adhesive gel
2 year warranty.
How to use:
Full charge of the patch before use is recommended.
1. RECHARGE PREPARATION
Open the plastic envelope and take a refill of adhesive gel.
Gently remove the blue protective film making sure that the two parts of the adhesive gel remain in place on the transparent film.
Keep the blue protective film to put it back on the patch after each use.
2. PATCH PREPARATION
Using the transparent protective film, correctly position the two parts of the gel on the patch, making sure that they are perfectly superimposed on the two electrical circuit parts of the patch.
Remove the clear protective film, making sure the gels remain on the patch (hold the gel in place with your finger if necessary).
1 adhesive gel = 30 uses approx.
(Note: you can discard the transparent protective film)
3. APPLICATION AND INITIATION OF THE PATCH
For first use, we recommend applying the patch to a non-painful area in your field of vision (your arm, for example), to test it and understand how it works. Then you can put it on the painful area
Apply the patch on the painful area and briefly press the power button: a beep will sound and a green light will illuminate. “Program 1 is selected”
If you don't see a green light or hear a beep, this means the pad is out of charge. Recharge the patch using the supplied cable.
4. PROGRAM SELECTION
There are 5 programs available. Each program lasts 30 minutes. To learn more, see the full manual.
When you turn on the patch, program 1 will be selected by default: This is the recommended program for first use.
To change program, keep the (+) button pressed (approx. 3 sec. until you hear a series of beeps): 2 beeps indicate that program 2 has been activated. Release the button. Make a long press to go to program 3: 3 beeps. You can repeat the procedure until program 5: 5 beeps.
To start stimulation, go to the next stage.
5. START OF STIMULATION AND ADJUSTMENT OF INTENSITY
Once the program has been selected, briefly press the (+) button once to start stimulation.
You can adjust the intensity by briefly pressing the (+) and (-) buttons.
There are 15 intensity levels available
6. PATCH SHUTDOWN
After 30 minutes, the device automatically turns off.
If you want to turn off the device before the end of the session, briefly press the power off button (The pad will turn off with 3 beeps and 3 lights).
7. PATCH STORAGE
Before removing the patch, make sure it is turned off. Gently remove the patch, making sure the gels are still in contact with the electrical circuit (hold the gel with your finger if necessary).
Leave the gels on the patch and cover them with the blue protective film that you previously reserved.
Store the patch in the shipping box.
For the following uses, remove the blue protective film and go directly to step 3.
By buying this product you can collect up to 29 loyalty points. Your cart will total 29 points that can be converted into a voucher of €0.87.
€34.90
€29.67
Save 15%
Tax included
Security Policy (edit with the Customer Trust and Security Information module)
Shipping policy (edit with the Customer Trust and Safety Information module)
Return Policy (edit with the Customer Trust and Safety Information module)
You might also like
16 other products in the same category:
Comments (0)
No customer reviews for the moment.